When a kernel-mode-setting driver loads it will trigger an add udev event
for /dev/dri/card0, followed by one udev change event per connector on the
card. This means that after our initial probe of the card,
create_heads_for_active_connectors is called a number of times for all the
udev change events.
After the initial enum our outputs array will contain active entries for
all connected displays. Meaning that the first loop in
create_heads_for_active_connectors would call get_output_info for
these outputs. Under the hood this does a number of ioctls and especially
the drmModeGetConnector call can be quite expensive.
Then in the second loop create_heads_for_active_connectors would call
get_output_info for all connectors, including for the once which were
checked in the first loop.
There is no reason why we cannot check if active connectors in the
old outputs array have changed when we are calling get_output_info for
all connectors to build the new array. This avoids unnecessarily making
the expensive get_output_info call twice for active connectors in the
old outputs array.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit f9e376797a ("ply-device-manager: Consume all events in one go")
changed ply-device-manager to consume all pending udev events in one go
instead of consuming only 1 and then returning back to the mainloop.
The idea here was to avoid the overhead of returning back to the mainloop,
doing the poll again, seeing more events were pending and then re-enter
ply-device-manager.
In retrospect this is not a good idea. Systemd waits for oneshot units
like plymouth-switch-root.service to finish and this can block the boot.
Specifically plymouth-switch-root.service must complete before systemd in
the initrd will exec the systemd from the real rootfs. This means that
systemd inside the initrd waits for the:
ExecStart=-/usr/bin/plymouth update-root-fs --new-root-dir=/sysroot
Command to complete, if this command runs while we are consuming udev
events from the graphics card (which sends a change event per probed
connector during the initial probe), then plymouth will not send the ack
to the plymouth boot-client (completing the ExecStart) until all udev
events are consumed.
On my main workstation with i915 graphics and 2 HDMI connected FHD monitors,
this delays the actual switching of the root by 1.9 - 2.1 seconds,
because the re-enumaration of the connectors in the drm plugin takes
about 0.4 seconds per run.
Other upcoming changes will greatly reduce that 0.4 seconds, but still
returning to the main-loop after a single udev event so that we can
answer any waiting boot-clients ASAP is a good idea.
This reverts commit f9e376797a.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If the end-animation is disabled then directly becoming idle on halt /
reboot leads to no animation at all being shown.
Fix this by not jumping to the end-animation on halt/reboot if the
end-animation is disabled.
Fixes: 50c619ed41 ("two-step: Add UseEndAnimation setting")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We try to start the end animation early based on our progress accounting
but this is highly unreliable because e.g.:
-It counts time to enter the diskcrypt passwd as normal boot time, while
this varies wildly from boot to boot
-Boot times for laptops can differ significantly between docked / undocked
state
Between gdm calling /bin/plymouth deactivate and the drm plugin's deactivate
method getting called there can be e.g. 2.1 seconds (from a random boot),
with a theoretical maximum of 3 seconds (2 seconds to finish the throbber +
1 second for the end animation).
On a modern system userland boot should be able to finish in say 5 seconds,
making gdm wait an additional 1 - 3 seconds for deactivation is a huge amount
of extra wait time!
This commit adds a new "UseEndAnimation" option to the two-step plugin,
which defaults to true. Setting this to false makes deactivation immediate.
This works nicely with the spinner (and bgrt) themes since we do not really
do anything special in the end animation there anyways and since we fade-over
into gdm things will still look ok, while shaving a signifcant chunk of our
boot time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The script plugin currently allows pixel buffers to be resized and
scaled, but provides no mechanism for script theme authors to just crop
the buffer, which is necessary for images that cannot be stretched,
such as progress bars with gradients.
This commit adds that feature as a new Crop method.
One case where the various widgets are being freed is the pixel-display-s
being removed because of a monitor being hot(un)plugged. When the monitor
configuration changes ply-device-manager removes all old pixel-displays
and then adds the pixel-displays from the new config.
Calling ply_pixel_display_draw_area on a pixel-display which is about to be
freed is a bad idea, if the monitor was actually unplugged this leads to
various sort of errors, including crashes in some cases.
ply-throbber is the only (older) widget which does a redraw on free,
this likely was not noticed until now because typically the throbber
will already have been stopped on free.
This commit adds a redraw parameter to ply_throbber_stop_now and sets
this to false when calling ply_throbber_stop_now from ply_throbber_free.
This fixes plymouth sometimes crashing when monitors are hot(un)plugged
while plymouth is running.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
One case where the various widgets are being freed is the pixel-display-s
being removed because of a monitor being hot(un)plugged. When the monitor
configuration changes ply-device-manager removes all old pixel-displays
and then adds the pixel-displays from the new config.
Calling ply_pixel_display_draw_area on a pixel-display which is about to be
freed is a bad idea, if the monitor was actually unplugged this leads to
various sort of errors, including crashes in some cases.
ply-keymap-icon is a recently added widget, none of the other
(older) widgets redraw themselves as hidden on free because there is
no reason to do this.
This commit removes the troublesome hide call (which involves redrawing).
This fixes plymouth sometimes crashing when monitors are hot(un)plugged
while plymouth is running.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
One case where the various widgets are being freed is the pixel-display-s
being removed because of a monitor being hot(un)plugged. When the monitor
configuration changes ply-device-manager removes all old pixel-displays
and then adds the pixel-displays from the new config.
Calling ply_pixel_display_draw_area on a pixel-display which is about to be
freed is a bad idea, if the monitor was actually unplugged this leads to
various sort of errors, including crashes in some cases.
ply-capslock-icon is a recently added widget, none of the other
(older) widgets redraw themselves as hidden on free because there is
no reason to do this.
This commit adds a new stop_polling helper and replaces the troublesome
hide call (which involves redrawing) with this. This fixes plymouth
sometimes crashing when monitors are hot(un)plugged while plymouth is
running.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
script_lib_plymouth_on_system_update() was never called, because
the plugin interface mapping was missing.
Fixes: #79
Signed-off-by: J-P Nurmi <jpnurmi@gmail.com>
Doing a ply_trace both before and after the disconnect handler, which
gets called every time a boot client asks something of us through by
calling /sbin/plymouth leads to a lot of not really informative messages
in the debug-log.
This removes the 2 ply_trace calls around the disconnect handlers to make
the logs easier to read.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The boot server uses a disconnect handler which closes the fd, this
causes deleting the fd from the epoll watch list to fail with an EBADF
error. Since the fd was closed it was already removed from the epoll
watch list, so the failure is harmless, silence these errors getting logged
to the debug logs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
plymouth calls `grantpt()` when setting up the pseudoterminal it uses
for boot logging and console broadcasting. `grantpt()` traditionally
sets up the access permissions and file mode of the created slave
pseudoterminal device node.
That call is unnecessary for two reasons:
1. The kernel automatically sets up the correct permissions at open
time on modern Linux.
2. plymouthd runs as root anyway
Furthermore, it seems like, for some unknown reason, the call may be
interfering with the shutdown process.
This commit drops the call, since it's unnecessary, and potentially
even problematic.
Both handlers on_deactivate() and on_quit() sets the handler
on_boot_splash_idle() using the helper ply_boot_splash_become_idle().
That helper creates a new trigger and it stores it alongside the handler
in its context. The helper asserts if the trigger is set (i.e. a handler
is pending already).
None of the handlers on_deactivate() and on_quit() check if the handler
on_boot_splash_idle() is set already.
There is a race condition that leads to the situation in which the
assertion is false and causes plymouthd to signal itself with SIGABRT
and die.
First, a client sends the request deactivate to the daemon that creates
a trigger for the idle handler. Then, the trigger is still pending while
another client sends the request quit to the daemon that tries to create
a second trigger and die because of the assertion.
This commit adds the new state variable splash_is_becoming_idle that is
checked before calling the helper ply_boot_splash_become_idle() to avoid
to call it twice. The state variable is set by the caller after it calls
the helper ply_boot_splash_become_idle(). It is cleared by the handler
on_boot_splash_idle() after the splash becomes idle.
Fixes:
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-boot-server.c:350:print_connection_process_identity : connection is from pid 683 (/usr/bin/plymouth deactivate) with parent pid 1 (/usr/lib/systemd/systemd --switched-root --system --deserialize 27)
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-boot-server.c:459:ply_boot_connection_on_request : got deactivate request
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 main.c:1275:on_deactivate : deactivating
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-event-loop.c:967:ply_event_loop_stop_watching_for_timeout : no matching timeout found for removal
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-device-manager.c:1112:ply_device_manager_pause : ply_device_manager_pause() called, stopping watching for udev events
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-event-loop.c:761:ply_event_loop_stop_watching_fd : stopping watching fd 8
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-event-loop.c:777:ply_event_loop_stop_watching_fd : removing destination for fd 8
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-event-loop.c:786:ply_event_loop_stop_watching_fd : no more destinations remaing for fd 8, removing source
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-device-manager.c:1092:ply_device_manager_deactivate_keyboa: deactivating keyboards
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-event-loop.c:761:ply_event_loop_stop_watching_fd : stopping watching fd 10
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-event-loop.c:777:ply_event_loop_stop_watching_fd : removing destination for fd 10
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ply-boot-splash.c:687:ply_boot_splash_become_idle : telling splash to become idle
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ./plugin.c:1801:become_idle : deactivation requested
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.186 ./plugin.c:1819:become_idle : already waiting for plugin to stop
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 ply-boot-server.c:350:print_connection_process_identity : connection is from pid 685 (/usr/bin/plymouth quit --retain-splash) with parent pid 1 (/usr/lib/systemd/systemd --switched-root --system --deserialize 27)
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 ply-boot-server.c:486:ply_boot_connection_on_request : got quit --retain-splash request
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 main.c:1326:on_quit : quitting (retain splash: true)
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 main.c:1338:on_quit : system initialized so saving boot-duration file
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 ply-utils.c:596:ply_create_directory : directory '/var/lib/plymouth/' already exists
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 main.c:686:get_cache_file_for_mode : returning cache file '/var/lib/plymouth//boot-duration'
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.191 ply-progress.c:214:ply_progress_save_cache : saving progress cache to /var/lib/plymouth//boot-duration
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.192 main.c:1634:tell_systemd_to_stop_printing_details : telling systemd to stop printing details
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.192 main.c:1352:on_quit : closing log
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.192 ply-device-manager.c:1092:ply_device_manager_deactivate_keyboa: deactivating keyboards
Feb 25 22:04:35 steamos plymouthd[312]: 00:00:04.192 main.c:1358:on_quit : unloading splash
Feb 25 22:04:35 steamos plymouthd[312]: plymouthd: ply-boot-splash.c:677: ply_boot_splash_become_idle: Assertion `splash->idle_trigger == NULL' failed.
Feb 25 22:05:06 steamos systemd[1]: plymouth-start.service: Main process exited, code=dumped, status=6/ABRT
Feb 25 22:05:06 steamos systemd[1]: plymouth-start.service: Failed with result 'core-dump'.
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
When walking a list, we only need to store the next_node before doing
operations on the current node, if the operation modifies the list,
which is only the case in free_heads() in all other cases we can remove
the unnecessary next_node helper variable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When walking a list, we only need to store the next_node before doing
operations on the current node, if the operation modifies the list,
which is only the case in free_views() and remove_pixel_display () in all
other cases we can remove the unnecessary next_node helper variable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that the spinfinity theme has been modified to use the two-step
splash plugin instead, there are no more users of the throbgress plugin,
so lets remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
flush_head() already sets the scan-out buffer if necessary and if it is not
necessary then we do not want to do this. Specifically second and later heads
do not yet have their buffer drawn to when activate gets called from the
map_to_device call for the first head and then we do not want to start
scanning out the uninitialized buffer.
Removing the explicit ply_renderer_head_set_scan_out_buffer() call also
allows removing the if (head->scan_out_buffer_id != 0) check,
flush_head() already checks this itself.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We do not want to set our buffer as scanout source before it has been
drawn to by the splash, to avoid a flicker caused by us installing a
black buffer for scanout.
To avoid this, flush_head() only calls reset_scan_out_buffer() if the buffer
for the head has updated_areas, iow if it already has been drawn to.
Our ply_pixel_buffer_fill_with_color() call in ply_renderer_head_new()
causes updated_areas to be non-empty, triggering a reset_scan_out_buffer()
call before the buffer has been drawn at least once.
This commit fixes this by clearing the updated_areas after the
ply_pixel_buffer_fill_with_color() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On devices which have their LCD panel mounted 90° rotated with the left-side
of the physical LCD-panel up (at the top), we were using the wrong offset
for placing the bgrt graphics. We were directly using y_offset from the bgrt
as x_offset, but y_offset is from the top of the physical LCD which in this
case is the right side of the panel as seen by the user. Where as our x_offset
is defined to have 0 at the left side.
This commit fixes this issue by flipping the y_offset value on these panels
before using it as our x_offset.
This fixes the logo jumping 6 pixels to the left on an Asus T100HA, which
has such a panel and uses a bgrt y_offset of 512, which results in a flipped
y_offset of 518 (for some reason the log is not entirely centered triggering
this problem).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The keyboard-indicators should be located close to the dialog/entry to
make clear that they belong to each other. Using relative positioning
does not work well for this.
Drop the KeyboardIndicator[Vertic|Horizont]alAlignment options (we have
never done a release with these) and put the keyboard indicators at
a fixed offset (half their height) from the bottom of the dialog instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that the drm plugin uses hw-rotation for upside down panels when
the GOP does so, there is no need to treat the bgrt rotation for
upside-down panels special anymore,
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On devices with an upside down LCD panel and where the hw is capable of
rotating the image to correct this the firmware will program the primary
plane to use hw rotation. When we reset this, this may lead to a small
flicker, where the vendor logo is briefly shown upside down.
A bigger problem is the transition to gdm/mutter. We leave the splash
on screen when mutter loads for a smooth transition, when mutter turns
hw-rotation back on, the splash turns upside down! And mutter then fades
from the upside-down splash to the login screen, which looks kinda bad.
Keeping the hw-rotation (and disabling our sw rotation) on devices like
this fixes both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Factor most of the code in ply_renderer_head_clear_plane_rotation() out
into a get_primary_plane_rotation() helper, this is a preparation patch
for adding support for using hw-rotation in some cases.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If we need to (re)install our fb as the buffer to scan-out of during
flush, then do so after updating our fb contents, rather then before.
This removes another potential source of flickering.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of installing a framebuffer with uninitialized contents, delay
installing our framebuffer until the first (re)draw.
This fixes some ugly flashes when plymout loads in some cases and it
also removes a FIXME comment from the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 4e1c00b89a (" ply-pixel-buffer: Fix right and bottom edge rendering
of scaled buffers"), which tried to fix a minor rendering issue with the right
and bottom edge of scaled images, contains a typo which actually makes things
worse :|
When checking if iy exceeds the height of the image, ix gets set to the height
instead of iy leading to addressing pass part of the buffer which leads to
various rendering artifacts.
This commit fixes the typo and thus also the artifacts.
Fixes: #83
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mark the display area where the icon is as damaged on show to force it
being drawn on show, in case capslock is on at show time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a new control which draws a keyboard-icon + a pre-rendered text
describing the current layout/keymap (as reported by the renderer).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a script for generating a png with the short-name (ignoring variants)
of all keymaps listed by "localectl list-keymaps" pre-generated.
This scripts also generates a ply-keymap-metadata.h file with info on
which pre-generated keymap name is where in the png.
This will be used in a follow-up commit to add support for a new
keyboard-keymap-icon control to libply-splash-graphics.
Note that this commit does not add the generated keymap-render.png file,
this file will be added to each themes image-dir separately as the color
of the pre-generated text may differ per theme.
Changes by Hans de Goede:
- Change generated metadata into a C header file
- Drop drawing of curved corners, we just want the text
- Add special handling for dvorak
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a function to get the keymap from a renderer and implement
this for the drm and frame-buffer renderers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In some cases me way want to parse key=value style config files from
outside of plymouth which lack ini style groups.
This commit adds a new ply_key_file_load_groupless_file function which
supports loading such files. When a file is loaded this way, NULL must
be passed as group_name for subsequent ply_key_file_get_* calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Recent gcc versions give the following compiler warning with space-flares:
./plugin.c: In function ‘star_bg_update’:
./plugin.c:762:21: warning: taking the absolute value of unsigned type ‘uint32_t’ {aka ‘unsigned int’} has no effect [-Wabsolute-value]
762 | if (abs (((image_data[x + y * width] >> 16) & 0xff) - ((pixel_colour >> 16) & 0xff)) > 8) {
| ^~~
This commit fixes this, assuming that gcc actually optimises the abs()
away, this will also make the code behave as intended again.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Switch to ply_kernel_command_line_get_key_value where appropriate.
While at it also fix a mem-leak when falling back override_splash_path from
PLYMOUTH_RUNTIME_THEME_PATH to PLYMOUTH_THEME_PATH.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ply_kernel_command_line_get_string_after_prefix returns the rest of
the commandline after the passed in prefix. When parsing key=value parts
of the commandline, we really only want the value part and stop at the
whitespace separating it from other kernel commandline arguments.
This commit adds a new helper which returns a strdup-ed string containing
just the value; instead of the entire rest of the kernel commandline.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
These 2 functions were doing almost the same. Move the setting of the
entry text or bullet count into view_show_prompt were it belongs and
merge these 2 functions into 1 function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove superflous is_hidden / is_stopped checks from our on_draw
handler. In all 3 cases the is_hidden / is_stopped check guards
a draw_area call, but the draw_area calls themselves contain the
same check, so it checking this in on_draw is not necessary.
Also note that we are already not doing such a check for e.g. the
progress_bar so lets be consistent and remove the check everywhere.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cleanup the stop_animation function:
- Remove the trigger argument as all callers pass NULL
- Remove the logging of "hiding progress animation" we already log a
generic "stopping animation" message and we do not log such a message
for the other animated controls, so remove this one for consistency
- Add a NULL pointer check for view->end_animation, as this can actually
be NULL when view_load_end_animation fails
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move ply_progress_animation_set_transition call up, grouping it with the
ply_progress_animation_new call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Until now we have been disabling the animations when the theme specifies
that a progress-bar should be drawn for the current mode.
This commit adds a new UseAnimation setting which defaults to
!UseProgressBar to preserve the old behavior if UseAnimation is not
set by the theme.
This makes two-step more flexible. Specifically it will allow implementing
the spinfinity theme using two-step; and spinifinity is the only user of
the throbgress plugin, so this will allow removal of that plugin.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit makes the progress-bar location configurable seperately from
the animation location and it makes the progress-bar size configurable
instead of hardcoding it.
This makes two-step more flexible. Specifically it will allow implementing
the spinfinity theme using two-step; and spinifinity is the only user of
the throbgress plugin, so this will allow removal of that plugin.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Before this commit we were not hiding the progress-bar when starting the
end-animation nor when stop_animation gets called. This adds the 2 missing
hide calls, making the handling of the progress-bar identical to that of
the progress-animation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We were only calling ply_progress_bar_set_percent_done from the
system_update callback and not from the on_boot_progress callback.
This commit fixes this by adding the missing calls for this to
update_progress_animation and it makes system_update use
update_progress_animation instead of duplicating the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We should always disable (hide) the progress-animation when
starting the end-animation. Instead of having all callers of
view_start_end_animation do this themselves, do it at the beginning
of view_start_end_animation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for showing a capslock indicator when capslock is pressed
while entering a password.
This is automatically enabled if a capslock.png file is present in
the theme's image dir.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede
J-P Nurmi
Zhao Qiang
Gaël PORTAY
Alberto Ruiz
ZhaoQiang