gentoo-overlay/net-misc/termpkg/files/ttyd.confd

# Configfile for /etc/init.d/ttyd

# HINT: if you only need one virtual TTY, then you can use this config.
# Otherwise you should use it as a template for specific configurations.
# Just copy /etc/conf.d/ttyd to /etc/conf.d/ttyd.<foo> and symlink
# /etc/init.d/ttyd to /etc/init.d/ttyd.<foo>


# Master pseudo tty device to open and wait for a connection on.
# For reference, in Linux the master pseudo tty devices are the
# devices /dev/pty[a-ep-z][0-9a-f] and the slave devices are
# /dev/tty[a-ep-z][0-9a-f].
#
PTY="/dev/ptyp0"

# The host and port parameters specify the host and IP port to
# connect to when the slave pseudo device is opened.
#
HOST="host.example.com"
PORT=3000

# The optional mode and user options specify the filesystem
# permissions of the slave pseudo device. We set them right
# after the ttyd daemon has started. After stopping, we reset
# them to the permissions of the master pseudo device.
#
#MODE=660
#USER="root:uucp"

# Sets the initial baud-rate of the device (optional).
#
#BAUDRATE=115200

# Optional port settings. Specified by a string of one of
# more of the following concatenated together with no
# intervening spaces:
#
# 8: 8 bits/character
# 7: 7 bits/character
# 6: 6 bits/character
# 5: 5 bits/character
# N: No parity
# E: Even parity
# O: Odd parity
# C0: No hardware flow control
# C1: Hardware flow control
# S0: No software flow control
# S1: Software flow control
#
#PORT_SETTINGS="8NC0"

# You can create symlinks to the slave pseudo device, so you
# have an easy to remember name for your virtual device. You
# can add as many links as you want, if you blank-seperate the
# names. All links *must* be relative and beneath to /dev.
#
#SYMLINK="ttyd/modem ttyNET0"

# Some odd programs just don't work with symlinks, so you
# can also create hardlinks (even in addition to symlinks).
# Same rules apply as for symlinks.
#
#HARDLINK="ttyS5"