You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gentoo-overlay/sys-devel/distcc/distcc-3.2_rc1-r4.ebuild

206 lines
5.7 KiB

# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
EAPI=5
PYTHON_COMPAT=( python2_7 )
inherit autotools eutils fdo-mime flag-o-matic multilib python-single-r1 systemd toolchain-funcs user
MY_P="${P/_}"
DESCRIPTION="Distribute compilation of C code across several machines on a network"
HOMEPAGE="http://distcc.org/"
SRC_URI="https://distcc.googlecode.com/files/${MY_P}.tar.bz2"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="alpha amd64 arm ~arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~sparc-fbsd ~x86-fbsd"
IUSE="avahi crossdev gnome gssapi gtk hardened ipv6 selinux xinetd"
RESTRICT="test"
CDEPEND="${PYTHON_DEPS}
dev-libs/popt
avahi? ( >=net-dns/avahi-0.6[dbus] )
gnome? (
>=gnome-base/libgnome-2
>=gnome-base/libgnomeui-2
x11-libs/gtk+:2
x11-libs/pango
)
gssapi? ( net-libs/libgssglue )
gtk? ( x11-libs/gtk+:2 )"
DEPEND="${CDEPEND}
virtual/pkgconfig"
RDEPEND="${CDEPEND}
!net-misc/pump
>=sys-devel/gcc-config-1.4.1
selinux? ( sec-policy/selinux-distcc )
xinetd? ( sys-apps/xinetd )"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
S="${WORKDIR}/${MY_P}"
DCCC_PATH="/usr/$(get_libdir)/distcc/bin"
DISTCC_VERBOSE="0"
pkg_setup() {
enewuser distcc 240 -1 -1 daemon
python-single-r1_pkg_setup
}
src_prepare() {
epatch "${FILESDIR}/${PN}-3.0-xinetd.patch"
# bug #253786
epatch "${FILESDIR}/${PN}-3.0-fix-fortify.patch"
# bug #255188
epatch "${FILESDIR}/${PN}-3.2_rc1-freedesktop.patch"
# bug #258364
epatch "${FILESDIR}/${PN}-3.2_rc1-python.patch"
# for net-libs/libgssglue
epatch "${FILESDIR}/${PN}-3.2_rc1-gssapi.patch"
# SOCKSv5 support needed for Portage, bug #537616
epatch "${FILESDIR}/${PN}-3.2_rc1-socks5.patch"
epatch_user
# Bugs #120001, #167844 and probably more. See patch for description.
use hardened && epatch "${FILESDIR}/distcc-hardened.patch"
sed -i \
-e "/PATH/s:\$distcc_location:${EPREFIX}${DCCC_PATH}:" \
-e "s:@PYTHON@:${EPYTHON}:" \
pump.in || die "sed failed"
sed \
-e "s:@EPREFIX@:${EPREFIX:-/}:" \
-e "s:@libdir@:/usr/$(get_libdir):" \
"${FILESDIR}/3.2/distcc-config" > "${T}/distcc-config" || die
eaclocal -Im4 --output=aclocal.m4
eautoconf
}
src_configure() {
local myconf="--disable-Werror --with-docdir=/usr/share/doc/${PF}"
# More legacy stuff?
[ "$(gcc-major-version)" = "2" ] && filter-lfs-flags
# --disable-rfc2553 b0rked, bug #254176
use ipv6 && myconf="${myconf} --enable-rfc2553"
econf \
$(use_with avahi) \
$(use_with gtk) \
$(use_with gnome) \
$(use_with gssapi auth) \
${myconf}
}
src_install() {
default
python_optimize
newinitd "${FILESDIR}/3.2/init" distccd
systemd_dounit "${FILESDIR}/distccd.service"
systemd_install_serviced "${FILESDIR}/distccd.service.conf"
cp "${FILESDIR}/3.2/conf" "${T}/distccd" || die
if use avahi; then
cat >> "${T}/distccd" <<-EOF
# Enable zeroconf support in distccd
DISTCCD_OPTS="\${DISTCCD_OPTS} --zeroconf"
EOF
sed -i '/ExecStart/ s|$| --zeroconf|' "${ED}"/usr/lib/systemd/system/distccd.service || die
fi
doconfd "${T}/distccd" || die
cat > "${T}/02distcc" <<-EOF
# This file is managed by distcc-config; use it to change these settings.
# DISTCC_LOG and DISTCC_DIR should not be set.
DISTCC_VERBOSE="${DISTCC_VERBOSE:-0}"
DISTCC_FALLBACK="${DISTCC_FALLBACK:-1}"
DISTCC_SAVE_TEMPS="${DISTCC_SAVE_TEMPS:-0}"
DISTCC_TCP_CORK="${DISTCC_TCP_CORK}"
DISTCC_SSH="${DISTCC_SSH}"
UNCACHED_ERR_FD="${UNCACHED_ERR_FD}"
DISTCC_ENABLE_DISCREPANCY_EMAIL="${DISTCC_ENABLE_DISCREPANCY_EMAIL}"
DCC_EMAILLOG_WHOM_TO_BLAME="${DCC_EMAILLOG_WHOM_TO_BLAME}"
EOF
doenvd "${T}/02distcc" || die
keepdir "${DCCC_PATH}" || die
dobin "${T}/distcc-config" || die
# create the distccd pid directory
keepdir /var/run/distccd || die
fowners distcc:daemon /var/run/distccd || die
if use gnome || use gtk; then
einfo "Renaming /usr/bin/distccmon-gnome to /usr/bin/distccmon-gui"
einfo "This is to have a little sensability in naming schemes between distccmon programs"
mv "${ED}/usr/bin/distccmon-gnome" "${ED}/usr/bin/distccmon-gui" || die
dosym distccmon-gui /usr/bin/distccmon-gnome || die
fi
if use xinetd; then
insinto /etc/xinetd.d || die
newins "doc/example/xinetd" distcc || die
fi
rm -r "${ED}/etc/default" || die
rm "${ED}/etc/distcc/clients.allow" || die
rm "${ED}/etc/distcc/commands.allow.sh" || die
}
pkg_postinst() {
if [ -x "${EPREFIX}/usr/bin/distcc-config" ] ; then
if use crossdev; then
"${EPREFIX}/usr/bin/distcc-config" --update-masquerade-with-crossdev
else
"${EPREFIX}/usr/bin/distcc-config" --update-masquerade
fi
fi
use gnome && fdo-mime_desktop_database_update
elog
elog "Tips on using distcc with Gentoo can be found at"
elog "https://wiki.gentoo.org/wiki/Distcc"
elog
elog "How to use pump mode with Gentoo:"
elog "# distcc-config --set-hosts \"foo,cpp,lzo bar,cpp,lzo baz,cpp,lzo\""
elog "# echo 'FEATURES=\"\${FEATURES} distcc distcc-pump\"' >> /etc/portage/make.conf"
elog "# emerge -u world"
elog
elog "To use the distccmon programs with Gentoo you should use this command:"
elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-text 5"
if use gnome || use gtk; then
elog "Or:"
elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-gnome"
fi
elog
elog "***SECURITY NOTICE***"
elog "If you are upgrading distcc please make sure to run etc-update to"
elog "update your /etc/conf.d/distccd and /etc/init.d/distccd files with"
elog "added security precautions (the --listen and --allow directives)"
elog
}
pkg_postrm() {
# delete the masquerade directory
if [ ! -f "${EPREFIX}/usr/bin/distcc" ] ; then
einfo "Remove masquerade symbolic links."
rm "${EPREFIX}${DCCC_PATH}/"*{cc,c++,gcc,g++}
rmdir "${EPREFIX}${DCCC_PATH}"
fi
use gnome && fdo-mime_desktop_database_update
}