You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gentoo-overlay/dev-embedded/openocd/openocd-0.8.0.ebuild

142 lines
2.8 KiB

# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
EAPI="5"
inherit eutils multilib flag-o-matic toolchain-funcs udev user
# One ebuild to rule them all
if [[ ${PV} == "9999" ]] ; then
inherit autotools git-2
EGIT_REPO_URI="git://git.code.sf.net/p/${PN}/code"
EGIT_PROJECT="${PN}"
else
MY_PV="${PV/_/-}"
MY_P="${PN}-${MY_PV}"
S="${WORKDIR}"/${MY_P}
KEYWORDS="~amd64 ~arm ~x86"
SRC_URI="mirror://sourceforge/project/${PN}/${PN}/${MY_PV}/${MY_P}.tar.gz"
fi
DESCRIPTION="OpenOCD - Open On-Chip Debugger"
HOMEPAGE="http://openocd.sourceforge.net"
LICENSE="GPL-2+"
SLOT="0"
IUSE="cmsis-dap dummy ftdi parport +usb verbose-io"
RESTRICT="strip" # includes non-native binaries
RDEPEND=">=dev-lang/jimtcl-0.75
cmsis-dap? ( dev-libs/hidapi )
usb? (
virtual/libusb:0
virtual/libusb:1
)
ftdi? ( dev-embedded/libftdi:= )"
DEPEND="${RDEPEND}
virtual/pkgconfig"
pkg_setup() {
enewgroup plugdev
}
src_prepare() {
epatch_user
# jimtcl-0.75 compatibility. Remove it on the
# next version bump
epatch "${FILESDIR}"/${P}-jimtcl-0.75.patch
if [[ ${PV} == "9999" ]] ; then
AT_NO_RECURSIVE=yes eautoreconf
fi
}
src_configure() {
# Here are some defaults
local myconf=(
--enable-buspirate
--disable-werror
--disable-internal-jimtcl
--enable-amtjtagaccel
--enable-ep93xx
--enable-at91rm9200
--enable-gw16012
--enable-oocd_trace
--enable-arm-jtag-ew
--enable-sysfsgpio
--enable-bcm2835gpio
)
# Adapters requiring usb/libusb-1.X support
if use usb; then
myconf+=(
--enable-aice
--enable-usb-blaster-2
--enable-ftdi
--enable-ti-icdi
--enable-ulink
--enable-osbdm
--enable-opendous
--enable-usbprog
--enable-jlink
--enable-rlink
--enable-stlink
--enable-vsllink
--enable-armjtagew
$(use_enable verbose-io verbose-usb-io)
$(use_enable verbose-io verbose_usb_comms)
)
else
myconf+=(
--disable-aice
--disable-usb-blaster-2
--disable-ftdi
--disable-ti-icdi
--disable-ulink
--disable-osbdm
--disable-opendous
--disable-usbprog
--disable-jlink
--disable-rlink
--disable-stlink
--disable-vsllink
--disable-armjtagew
)
fi
if use ftdi; then
myconf+=(
--enable-usb_blaster_libftdi
--enable-openjtag_ftdi
--enable-presto_libftdi
)
else
myconf+=(
--disable-openjtag_ftdi
--disable-presto_libftdi
--disable-usb_blaster_libftdi
)
fi
econf \
$(use_enable dummy) \
$(use_enable cmsis-dap) \
$(use_enable parport) \
$(use_enable parport parport_ppdev) \
$(use_enable verbose-io verbose-jtag-io) \
"${myconf[@]}"
}
src_install() {
default
env -uRESTRICT prepstrip "${ED}"/usr/bin "${ED}"/usr/$(get_libdir)
udev_dorules "${D}"/usr/share/${PN}/contrib/*.rules
}
pkg_postinst() {
elog "To access openocd devices as user you must be in the plugdev group"
}